Original model: Riser for Bambulab P1S with ventilation and light
Creator: Andys1957 (@Andys1957)
Source: https://www.printables.com/model/642957-riser-for-bambulab-p1s-with-ventilation-and-light
Printables model ID: 642957
Model updated: December 1, 2023 (source-page text supplied by owner)
Model files dated: November 10, 2023

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
SPDX identifier: CC-BY-NC-SA-4.0
License deed: https://creativecommons.org/licenses/by-nc-sa/4.0/
License text: https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.en

License evidence: Owner supplied the Printables model-page text in this
conversation on 2026-10-21. It states:
"The author marked this model as their own original creation."
"Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike"

Keep this attribution with redistributed source and remix files. Attribute the
original author, link the license, and indicate modifications. Distribute a
shared adaptation under CC BY-NC-SA 4.0; commercial use is not granted.
No endorsement by the original author is implied.

Current revision: R13 update 10, October 24, 2026.
Changes by thereprocase: four-piece frame, tapered puzzle joints and overlapping
seams, downward-facing LED backing, lift-in diffusers, rounded contact edges,
bed-starting chamfers and a rear cable plug. The original riser was used as a
reference for the printer/glass interface. This package contains the revised
geometry, not the original author's files. CC BY-NC-SA 4.0 applies.