{
  "CAD_and_pickup": {
    "id": "TM01",
    "name": "Tape-measure dock",
    "cells": 4,
    "pose": "upright",
    "pickup_lift_mm": 10,
    "pickup_forward_mm": 65,
    "load_point": [
      0,
      55,
      -55
    ],
    "tool_spec": {
      "case_width_max_mm": 92,
      "depth_including_clip_max_mm": 48,
      "reference": "Conservative case-plus-clip envelope; product listings often describe retail packaging, so no exact brand fit is asserted",
      "pocket_width_mm": 94,
      "pocket_depth_mm": 50.45
    },
    "description": "A shallow open dock for a tape measure up to 92 mm across and 48 mm deep including its clip. Lift 10 mm and pull forward.",
    "prefix": "part-tm01__v1__upright__fit-pf02c9-hoop5",
    "mount": {
      "fit_file": "reviews/pf02-fits/peg-fit-clamp-0.49.scad",
      "top": {
        "upper_ribs_mm": 0.5,
        "clamp_mm": 0.49
      },
      "columns_x_mm": [
        -38.099999999999994,
        38.099999999999994
      ],
      "plate": {
        "x0": -49.8,
        "x1": 49.8,
        "y0": 0.15,
        "y1": 5.55,
        "z0": -57,
        "z1": 5.12
      },
      "hoop": {
        "concept": "HOOP",
        "arm_mm": 0.8,
        "tip_half": 2.0,
        "even_catch_wall": true,
        "ramp_wall": true,
        "nose_mm": 0.9,
        "root_gusset_mm": 0.4,
        "body_ribs_mm": 0.3,
        "orientation": "hoop band horizontal, flexes in X (the print layers)",
        "detail": {
          "width_across_barbs_mm": 7.35,
          "catch_angle_deg": 55,
          "catch_length_mm": 0.6476919728439815,
          "ramp_angle_deg": 15.592255624701878,
          "crest_y_mm": [
            -4.487691972843981,
            -4.787691972843981
          ],
          "catch_bearing_per_side_mm": 0.5,
          "nose_mm": 0.9,
          "ramp_wall_mm": 0.8,
          "min_wall_mm": 0.8,
          "root_gusset_mm": 0.4,
          "root_gusset_length_mm": 1.5,
          "arm_mm": 0.8,
          "closed_nose_mm": 0.9,
          "band_half_height_mm": 1.4,
          "root_clip_radius_mm": 2.95,
          "cheek_offset_down_mm": 0.0
        }
      },
      "rows": {
        "hooks": [
          0
        ],
        "bearing": [],
        "hoop": [
          2
        ],
        "empty": [
          1
        ]
      },
      "predicted_clamp_interference_at_3p94_mm": 0.4900000000000001
    },
    "volume_mm3": 58998.469500837404,
    "print_bounds_mm": [
      99.60000020000035,
      70.79000020000002,
      62.4493121871274
    ],
    "pose_matrix": [
      1.0,
      0.0,
      0.0,
      49.8,
      0.0,
      1.0,
      0.0,
      10.79,
      0.0,
      0.0,
      1.0,
      57.0,
      0,
      0,
      0,
      1
    ],
    "checks": {
      "native_valid": true,
      "solids": 1,
      "unchanged_board_side_delta_mm3": 0.0,
      "tool_routes": [
        {
          "tool_index": 0,
          "seated_clearance_mm": 0.05999999999999517,
          "sampled_poses": 41,
          "max_intersection_mm3": 0,
          "lift_mm": 10,
          "forward_mm": 65
        }
      ],
      "tool_neighbor_clearances_mm": [],
      "limits": "Sampled rigid tool-envelope pickup checks. Physical fit, support removal, stiffness, loads, and complete holder installation require testing. Tool shape assumptions are in reference metadata."
    },
    "source_sha256": "1f47c8c844a067489c2b1ba42762d8a651eaa236ec222881440ac1ca6ea5f630",
    "FreeCAD_version": [
      "1",
      "1",
      "4",
      "20260928 (Git shallow)",
      "Unknown",
      "2026/09/28 13:46:34",
      "(HEAD detached at 4fd3bf320)",
      "4fd3bf320d9566a27e60069fc8387448aaa3a094"
    ]
  },
  "print_geometry": {
    "watertight": true,
    "components": 1,
    "positive_volume": true,
    "overhangs": {
      "features": [],
      "peg_area_mm2": 130.5,
      "other_area_mm2": 0.0,
      "passed": true
    },
    "islands": {
      "points": [],
      "passed": true
    },
    "bed_face_mm2": 5961.060041656492,
    "bounds_mm": [
      99.5999984741211,
      70.79000091552734,
      62.44499969482422
    ],
    "inputs": {
      "installed_stl": "18bc6717c4285159b5a21d95b8748110a3123c8ffad5b660a5ff5204c55d3d6e",
      "print_stl": "ac7533a5aa41baeb996a211ae39cf8c323744b5567494c03067bc662c318833c"
    },
    "passed": true
  },
  "stiffness": {
    "name": "part-tm01__v1__upright__fit-pf02c9-hoop5",
    "material": {
      "E_MPa": 1800.0,
      "nu": 0.35
    },
    "h_mm": 2.5,
    "cases": [
      {
        "support": "pegs",
        "nodes": 52004,
        "elements": 27291,
        "fixed_nodes": 4466,
        "loads": [
          {
            "id": "sideways",
            "force_N": [
              5,
              0,
              0
            ],
            "point": [
              0,
              55,
              -55
            ],
            "what": "",
            "deflection_at_load_mm": 0.0034,
            "stiffness_N_per_mm": 1474.4,
            "max_deflection_mm": 0.0044,
            "max_at": [
              49.8,
              60.0,
              -44.0
            ]
          },
          {
            "id": "down",
            "force_N": [
              0,
              0,
              -5
            ],
            "point": [
              0,
              55,
              -55
            ],
            "what": "",
            "deflection_at_load_mm": 0.0603,
            "stiffness_N_per_mm": 82.9,
            "max_deflection_mm": 0.0655,
            "max_at": [
              0.0,
              60.0,
              -45.0
            ]
          }
        ]
      }
    ],
    "passed": true,
    "limits": "Linear isotropic solid ASA E=1800 MPa. Printed infill, layer bonds, board compliance, strength and fatigue require physical checks.",
    "inputs": {
      "step": "be4e062ad8bd5e09cde5044b9d25938cfabb8251a628d24c89fac6e69c83944d",
      "spec": "e3ace87167794ab4c62d6f63cb6862e3b2914c5797671e438d41ba0919e8aeae",
      "solver_script": "5c2f08b389a0858e01395b01354c35fa184c2258263639a49d4f120d41dc77f1"
    }
  },
  "toolpaths": {
    "id": "TM01",
    "gcode_sha256": "d3537428283b6e6ba9199acb75210fe7767d44da1d4d9867e696b803f552a5eb",
    "input_stl_sha256": "ac7533a5aa41baeb996a211ae39cf8c323744b5567494c03067bc662c318833c",
    "time": "1h 53m 16s",
    "density_g_cm3": 1.02,
    "extrusion_grams": 36.39,
    "features": {
      "Brim": {
        "extruded_filament_mm": 108.97351000000009,
        "minimum": [
          -54.91485056293944,
          -6.953657542236326,
          -56.80108
        ],
        "maximum": [
          54.914849037060534,
          63.12486385776369,
          -56.80108
        ],
        "moves": 564,
        "body_side_filament_mm": 81.32345,
        "grams": 0.267,
        "body_side_grams": 0.1995
      },
      "Support": {
        "extruded_filament_mm": 828.663729999995,
        "minimum": [
          -46.79448518506807,
          -24.135048550047035,
          -56.80108
        ],
        "maximum": [
          46.18112512265796,
          -2.244161305999061,
          1.0846399999999932
        ],
        "moves": 9257,
        "body_side_filament_mm": 0,
        "grams": 2.033,
        "body_side_grams": 0.0
      },
      "Inner wall": {
        "extruded_filament_mm": 3176.9377999999997,
        "minimum": [
          -49.17998696293945,
          -11.037152282938322,
          -56.80108
        ],
        "maximum": [
          49.17998543706055,
          57.39099485776368,
          5.261959999999995
        ],
        "moves": 7989,
        "body_side_filament_mm": 2310.7142199999807,
        "grams": 7.794,
        "body_side_grams": 5.6691
      },
      "Outer wall": {
        "extruded_filament_mm": 3027.195429999937,
        "minimum": [
          -49.59075676293945,
          -12.554250142236326,
          -56.80108
        ],
        "maximum": [
          49.59075523706056,
          57.80176465776369,
          5.460879999999996
        ],
        "moves": 10007,
        "body_side_filament_mm": 2170.666280000048,
        "grams": 7.427,
        "body_side_grams": 5.3255
      },
      "Bottom surface": {
        "extruded_filament_mm": 441.6627399999997,
        "minimum": [
          -48.79010376293946,
          -0.6240231422363216,
          -56.80108
        ],
        "maximum": [
          48.79010223706055,
          56.79622405776369,
          -56.80108
        ],
        "moves": 477,
        "body_side_filament_mm": 439.87776999999977,
        "grams": 1.084,
        "body_side_grams": 1.0792
      },
      "Internal solid infill": {
        "extruded_filament_mm": 2328.649729999949,
        "minimum": [
          -49.01985636293945,
          -10.64362354223632,
          -56.60216
        ],
        "maximum": [
          49.01985483706055,
          57.229869657763665,
          5.261959999999995
        ],
        "moves": 7412,
        "body_side_filament_mm": 2269.6106799999056,
        "grams": 5.713,
        "body_side_grams": 5.5682
      },
      "Sparse infill": {
        "extruded_filament_mm": 3797.9886800006884,
        "minimum": [
          -48.83638794591069,
          -9.750472742236322,
          -56.20432
        ],
        "maximum": [
          48.837674471422844,
          57.04686325776367,
          4.068439999999995
        ],
        "moves": 54949,
        "body_side_filament_mm": 3146.9795900005797,
        "grams": 9.318,
        "body_side_grams": 7.7208
      },
      "Internal Bridge": {
        "extruded_filament_mm": 658.9111200000186,
        "minimum": [
          -48.813974162939445,
          -10.16639693510889,
          -54.61296
        ],
        "maximum": [
          49.015876437060555,
          57.02498205776367,
          4.2673599999999965
        ],
        "moves": 1151,
        "body_side_filament_mm": 650.7598300000142,
        "grams": 1.617,
        "body_side_grams": 1.5966
      },
      "Top surface": {
        "extruded_filament_mm": 450.8229000000041,
        "minimum": [
          -49.48632376293945,
          -9.404351942236325,
          -53.81728
        ],
        "maximum": [
          49.486322237060534,
          57.69733165776366,
          5.460879999999996
        ],
        "moves": 801,
        "body_side_filament_mm": 449.8008800000041,
        "grams": 1.106,
        "body_side_grams": 1.1035
      },
      "Overhang wall": {
        "extruded_filament_mm": 3.7250400000000004,
        "minimum": [
          -41.55737256293945,
          -12.554250142236326,
          -53.61836
        ],
        "maximum": [
          41.557371037060534,
          -2.038344342236318,
          -2.6948399999999992
        ],
        "moves": 143,
        "body_side_filament_mm": 0,
        "grams": 0.009,
        "body_side_grams": 0.0
      },
      "Support interface": {
        "extruded_filament_mm": 9.665309999999995,
        "minimum": [
          -41.587210562939454,
          -13.464309142236317,
          -52.62376
        ],
        "maximum": [
          41.58764581823502,
          -2.26996455878103,
          -3.2916000000000025
        ],
        "moves": 366,
        "body_side_filament_mm": 0,
        "grams": 0.024,
        "body_side_grams": 0.0
      },
      "Bridge": {
        "extruded_filament_mm": 0.61152,
        "minimum": [
          -0.9259733629394518,
          -0.6468989422363176,
          -5.877560000000003
        ],
        "maximum": [
          1.085107837060555,
          2.549745457763681,
          -5.877560000000003
        ],
        "moves": 19,
        "body_side_filament_mm": 0.4331899999999999,
        "grams": 0.002,
        "body_side_grams": 0.0011
      }
    },
    "limits": "Feature classification and deposited centerline bounds, with commanded arc sweeps sampled at <=0.2 mm where below the 2048-point cap. Supports may flare at the bed; support contact and removal need visual review."
  },
  "installation_screen": {
    "pass": true,
    "minimum_front_board_y_mm": 0.0,
    "poses": 1790,
    "max_point_step_mm": 0.05,
    "mesh_deflection_mm": 0.005,
    "worst": {
      "point_yz": [
        0.15,
        5.12
      ],
      "translation_y": -0.15,
      "angle_deg": 0.0
    },
    "scope": "Front material vs board plane only; sampled nominal reference route, not certification of changed interference pegs or physical installation.",
    "input_sha256": "be4e062ad8bd5e09cde5044b9d25938cfabb8251a628d24c89fac6e69c83944d",
    "checker_sha256": "b539534deb12583027433caa51aff5844ac7526dff4e92f73d128be09c57c59e"
  },
  "physical_tests": "Pending"
}