{
  "id": "PB01",
  "name": "Compact utility bin",
  "cells": 4,
  "width_mm": 99.6,
  "height_mm": 40,
  "projection_mm": 40,
  "pockets": 1,
  "opening_width_mm": 94.0,
  "usable_depth_mm": 31.8,
  "floor_mm": 3.2,
  "wall_mm": 2.8,
  "mount_columns_x_mm": [
    -38.099999999999994,
    38.099999999999994
  ],
  "mount_upper_z_mm": 32,
  "fit_sha256": "e586ab4ff6173c76e10c960ca707da94b01c615a629480d4bceeae71c80e2438",
  "upstream_sha256": "9eb4aafb08cc513a8a9f2404721355185146bf573fdb916464db83365801d2fc",
  "mesh_sha256": "41c3690db7bfad00edcda2f4bb070e72b37f5efd85188512ccef34786c67c7fc",
  "mesh": {
    "closed": true,
    "components": 1
  },
  "floor_samples": [
    {
      "xy": [
        -23.5,
        12
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    },
    {
      "xy": [
        -23.5,
        22.0
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    },
    {
      "xy": [
        -23.5,
        32
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    },
    {
      "xy": [
        0.0,
        12
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    },
    {
      "xy": [
        0.0,
        22.0
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    },
    {
      "xy": [
        0.0,
        32
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    },
    {
      "xy": [
        23.5,
        12
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    },
    {
      "xy": [
        23.5,
        22.0
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    },
    {
      "xy": [
        23.5,
        32
      ],
      "floor_z": [
        0.0,
        3.2
      ]
    }
  ],
  "bed_contact_mm2": 3982.4,
  "bounds_xyz_mm": [
    99.5999984741211,
    50.126893043518066,
    40.0
  ],
  "stl": "part-pb01__v1__pegstr-bin-4-cells-1-pockets-99.6x40x40mm__fit-e586ab4ff6__print-flat-base.stl",
  "scad": "part-pb01__v1__pegstr-bin-4-cells-1-pockets-99.6x40x40mm__fit-e586ab4ff6__generator.scad",
  "prefix": "part-pb01__v1__pegstr-bin-4-cells-1-pockets-99.6x40x40mm__fit-e586ab4ff6",
  "qualification": "Form-review candidate. Upright on flat base; canonical rear pegs may need local supports. Not sliced or physically tested."
}