[
  {
    "id": "SD01",
    "section_check": {
      "mesh_sha256": "383ad64aa0fde65112190c0c7b4ffddf231ad0b2d0f67a742457e84690572c53",
      "layer_step_mm": 0.2,
      "xy_raster_mm": 0.25,
      "layers": 217,
      "unanchored_starts_above_0_2_mm2": [],
      "maximum_section_components": 3,
      "scope": "Sampled geometric sections with 0.25 mm XY tolerance. Detects disconnected starts; does not establish extrusion paths, adhesion, cooling, strength or surface finish."
    },
    "toolpaths": {
      "largest_bridge_extrusion_segment_mm": 16.34361382926064,
      "review_layers_mm": [
        0.2,
        9.8,
        21.8,
        33.8
      ],
      "extrusion_segments": 235645
    },
    "support_extrusion_segments": 0
  },
  {
    "id": "SD02",
    "section_check": {
      "mesh_sha256": "80c5c9dc70f1e9a6c65f7411e665b78dcc6415a5e1b3f418c4f932cdf838d63e",
      "layer_step_mm": 0.2,
      "xy_raster_mm": 0.25,
      "layers": 250,
      "unanchored_starts_above_0_2_mm2": [],
      "maximum_section_components": 3,
      "scope": "Sampled geometric sections with 0.25 mm XY tolerance. Detects disconnected starts; does not establish extrusion paths, adhesion, cooling, strength or surface finish."
    },
    "toolpaths": {
      "largest_bridge_extrusion_segment_mm": 14.180944467841346,
      "review_layers_mm": [
        0.2,
        11.2,
        25.0,
        39.0
      ],
      "extrusion_segments": 382257
    },
    "support_extrusion_segments": 0
  },
  {
    "id": "SD03",
    "section_check": {
      "mesh_sha256": "216f0639460fe7ebc332e50ef84303684720043975660295a7999729c30ce3bb",
      "layer_step_mm": 0.2,
      "xy_raster_mm": 0.25,
      "layers": 299,
      "unanchored_starts_above_0_2_mm2": [],
      "maximum_section_components": 3,
      "scope": "Sampled geometric sections with 0.25 mm XY tolerance. Detects disconnected starts; does not establish extrusion paths, adhesion, cooling, strength or surface finish."
    },
    "toolpaths": {
      "largest_bridge_extrusion_segment_mm": 15.410353143260544,
      "review_layers_mm": [
        0.2,
        13.4,
        30.0,
        46.6
      ],
      "extrusion_segments": 663953
    },
    "support_extrusion_segments": 0
  },
  {
    "id": "SD04",
    "section_check": {
      "mesh_sha256": "dd1e15f698726a5de4721ea0225dea699dbacc9d3ccd37864e837848734f7864",
      "layer_step_mm": 0.2,
      "xy_raster_mm": 0.25,
      "layers": 344,
      "unanchored_starts_above_0_2_mm2": [],
      "maximum_section_components": 3,
      "scope": "Sampled geometric sections with 0.25 mm XY tolerance. Detects disconnected starts; does not establish extrusion paths, adhesion, cooling, strength or surface finish."
    },
    "toolpaths": {
      "largest_bridge_extrusion_segment_mm": 19.435476351250042,
      "review_layers_mm": [
        0.2,
        15.2,
        34.6,
        53.8
      ],
      "extrusion_segments": 1168248
    },
    "support_extrusion_segments": 0
  }
]