[
  {
    "id": "SD01",
    "access": [
      {
        "tool": 1,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 44.19999729913783
      },
      {
        "tool": 2,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 44.19999729826987
      },
      {
        "tool": 3,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 44.19999729830144
      },
      {
        "tool": 4,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 44.19999729826716
      },
      {
        "tool": 5,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 44.199997298320774
      },
      {
        "tool": 6,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 44.19999729911651
      }
    ],
    "overhangs": {
      "rack": {
        "non_bed_non_peg_under_49p5_deg_area_mm2": 0,
        "rear_peg_under_49p5_deg_area_mm2": 127.53103586740326,
        "lowest_flagged_body_angle_deg": 90
      },
      "tip-floor": {
        "non_bed_non_peg_under_49p5_deg_area_mm2": 0,
        "rear_peg_under_49p5_deg_area_mm2": 127.53103586740326,
        "lowest_flagged_body_angle_deg": 90
      }
    },
    "note": "Surface-angle screen only; rear pegs need local support review. No slicer or print proof."
  },
  {
    "id": "SD02",
    "access": [
      {
        "tool": 1,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 54.39672371914981
      },
      {
        "tool": 2,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 54.396723719135416
      },
      {
        "tool": 3,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 54.39672371915518
      },
      {
        "tool": 4,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 54.39672371914109
      },
      {
        "tool": 5,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 54.39672371914172
      }
    ],
    "overhangs": {
      "rack": {
        "non_bed_non_peg_under_49p5_deg_area_mm2": 0,
        "rear_peg_under_49p5_deg_area_mm2": 127.5310352074448,
        "lowest_flagged_body_angle_deg": 90
      },
      "tip-floor": {
        "non_bed_non_peg_under_49p5_deg_area_mm2": 0,
        "rear_peg_under_49p5_deg_area_mm2": 127.5310352074448,
        "lowest_flagged_body_angle_deg": 90
      }
    },
    "note": "Surface-angle screen only; rear pegs need local support review. No slicer or print proof."
  },
  {
    "id": "SD03",
    "access": [
      {
        "tool": 1,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 38.4722907170434
      },
      {
        "tool": 2,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 38.47229071705032
      },
      {
        "tool": 3,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 38.472290717061895
      },
      {
        "tool": 4,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 38.4722907170684
      }
    ],
    "overhangs": {
      "rack": {
        "non_bed_non_peg_under_49p5_deg_area_mm2": 0,
        "rear_peg_under_49p5_deg_area_mm2": 127.53103369218297,
        "lowest_flagged_body_angle_deg": 90
      },
      "tip-floor": {
        "non_bed_non_peg_under_49p5_deg_area_mm2": 0,
        "rear_peg_under_49p5_deg_area_mm2": 127.53103369218297,
        "lowest_flagged_body_angle_deg": 90
      }
    },
    "note": "Surface-angle screen only; rear pegs need local support review. No slicer or print proof."
  },
  {
    "id": "SD04",
    "access": [
      {
        "tool": 1,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 15.402875385586288
      },
      {
        "tool": 2,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 15.40287538558874
      },
      {
        "tool": 3,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 15.40287538559062
      },
      {
        "tool": 4,
        "approach_cone_neighbor_overlap_mm3": 0.0,
        "two_mm_high_forward_block_mm3": 15.402875385586572
      }
    ],
    "overhangs": {
      "rack": {
        "non_bed_non_peg_under_49p5_deg_area_mm2": 0,
        "rear_peg_under_49p5_deg_area_mm2": 127.531033055624,
        "lowest_flagged_body_angle_deg": 90
      },
      "tip-floor": {
        "non_bed_non_peg_under_49p5_deg_area_mm2": 0,
        "rear_peg_under_49p5_deg_area_mm2": 127.531033055624,
        "lowest_flagged_body_angle_deg": 90
      }
    },
    "note": "Surface-angle screen only; rear pegs need local support review. No slicer or print proof."
  }
]