{
  "plates": [
    {
      "plate": 1,
      "paths": "PASS_PATHS_AND_ACCOUNTING",
      "startup": "PASS_START_CLEARANCE",
      "estimated_g": 12.54,
      "time": "41m 48s",
      "pause_count": 0
    },
    {
      "plate": 2,
      "paths": "PASS_PATHS_AND_ACCOUNTING",
      "startup": "PASS_START_CLEARANCE",
      "estimated_g": 71.72,
      "time": "3h 1m 29s",
      "pause_count": 1,
      "id": "MH01",
      "print_count": 1,
      "pause_before_layer_z": 38.2,
      "completed_height": 38.0,
      "first_cap_layers": [
        38.2,
        38.2,
        38.2,
        38.2,
        38.2,
        38.2
      ],
      "pre_pause_pocket_intrusions": 0
    },
    {
      "plate": 3,
      "paths": "PASS_PATHS_AND_ACCOUNTING",
      "startup": "PASS_START_CLEARANCE",
      "estimated_g": 108.04,
      "time": "4h 2m 19s",
      "pause_count": 1,
      "id": "MH02",
      "print_count": 2,
      "pause_before_layer_z": 38.2,
      "completed_height": 38.0,
      "first_cap_layers": [
        38.2,
        38.2,
        38.2,
        38.2
      ],
      "pre_pause_pocket_intrusions": 0
    },
    {
      "plate": 4,
      "paths": "PASS_PATHS_AND_ACCOUNTING",
      "startup": "PASS_START_CLEARANCE",
      "estimated_g": 120.94,
      "time": "4h 27m 40s",
      "pause_count": 1,
      "id": "MH03",
      "print_count": 2,
      "pause_before_layer_z": 38.2,
      "completed_height": 38.0,
      "first_cap_layers": [
        38.2,
        38.2,
        38.2,
        38.2
      ],
      "pre_pause_pocket_intrusions": 0
    },
    {
      "plate": 5,
      "paths": "PASS_PATHS_AND_ACCOUNTING",
      "startup": "PASS_START_CLEARANCE",
      "estimated_g": 120.87,
      "time": "4h 23m 24s",
      "pause_count": 1,
      "id": "MH04",
      "print_count": 1,
      "pause_before_layer_z": 38.2,
      "completed_height": 38.0,
      "first_cap_layers": [
        38.2,
        38.2,
        38.2,
        38.2
      ],
      "pre_pause_pocket_intrusions": 0
    }
  ],
  "mesh_repairs": "none",
  "native_warnings": [
    {
      "msg": "bed_temperature_too_high_than_filament",
      "level": "3",
      "error_code": "1000C001"
    },
    {
      "msg": "bed_temperature_too_high_than_filament",
      "level": "3",
      "error_code": "1000C001"
    },
    {
      "msg": "bed_temperature_too_high_than_filament",
      "level": "3",
      "error_code": "1000C001"
    },
    {
      "msg": "bed_temperature_too_high_than_filament",
      "level": "3",
      "error_code": "1000C001"
    },
    {
      "msg": "bed_temperature_too_high_than_filament",
      "level": "3",
      "error_code": "1000C001"
    }
  ],
  "settings_preserved": [
    "layer_height",
    "initial_layer_print_height",
    "wall_loops",
    "sparse_infill_density",
    "sparse_infill_pattern",
    "top_shell_layers",
    "bottom_shell_layers",
    "enable_support",
    "support_type",
    "support_on_build_plate_only",
    "brim_width",
    "nozzle_diameter",
    "filament_type",
    "machine_start_gcode",
    "machine_end_gcode",
    "extruder_offset",
    "machine_pause_gcode"
  ],
  "gui_checks": "Not performed: native desktop control unavailable",
  "physical_test": "Not yet printed; fit, holding force and hardware loading need user trial."
}