[
  {
    "id": "barrels",
    "label": "Three barrels",
    "cells": 5,
    "width_mm": 125.0,
    "mount_columns_x_mm": [
      -50.8,
      50.8
    ],
    "pose": "upright",
    "position": [
      38.1,
      0,
      0
    ],
    "print_bounds_mm": [
      125.0,
      76.62663336505949,
      125.44500000000001
    ],
    "peg_profile": {
      "variant": "rear-tongue-3p80-interference0p05",
      "board_grip_assumption_mm": 3.8,
      "source_board_assumption_mm": 3.94,
      "clearance_at_assumed_board_mm": -0.05,
      "predicted_clearance_at_3p94_board_mm": -0.1900000000000001,
      "tongue_run_mm": 5.0,
      "tongue_rise_mm": 3.3,
      "tongue_angle_deg": 33.4248111826038,
      "previous_tongue_angle_deg": 30.96375653207352,
      "elbow_center_y_mm": -2.578176717793985,
      "lower_locator": "Exact baseline lower locator, unchanged; designed for 3.94 mm board",
      "construction": "Canonical cylinder/sphere upper core and exact 120-degree cylindrical lower bearing segment. User-authorized parameter revision.",
      "scope": "Intentional interference: negative clearance requires plastic/board compliance. Assumed board grip, not measured thickness. No force or recoverable deformation claim.",
      "baseline_sha256": "f030d59fc8130b57cfcb4367202cdd0e03a1c335850f33fa41d28e85eb623d96"
    },
    "peg_checks": [
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      },
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      }
    ],
    "mesh": {
      "closed": true,
      "facets": 11294,
      "volume_error_fraction": 4.6462076237716806e-05,
      "tessellation_cleanup": false
    },
    "tools": [
      {
        "kind": "flux",
        "files": [
          {
            "file": "tool-0-0.stl",
            "material": "paper"
          },
          {
            "file": "tool-0-1.stl",
            "material": "yellow"
          },
          {
            "file": "tool-0-2.stl",
            "material": "holder"
          },
          {
            "file": "tool-0-3.stl",
            "material": "steel"
          }
        ],
        "axis": [
          0.0,
          -0.17364817766693033,
          0.984807753012208
        ],
        "old_tool": 0,
        "overlap_mm3": 0.0
      },
      {
        "kind": "paste",
        "files": [
          {
            "file": "tool-1-0.stl",
            "material": "paper"
          },
          {
            "file": "tool-1-1.stl",
            "material": "darksteel"
          },
          {
            "file": "tool-1-2.stl",
            "material": "holder"
          }
        ],
        "axis": [
          0.0,
          -0.17364817766693033,
          0.984807753012208
        ],
        "old_tool": 1,
        "overlap_mm3": 0.0
      },
      {
        "kind": "sucker",
        "files": [
          {
            "file": "tool-2-0.stl",
            "material": "steel"
          },
          {
            "file": "tool-2-1.stl",
            "material": "red"
          }
        ],
        "axis": [
          0.0,
          -0.17364817766693033,
          0.984807753012208
        ],
        "old_tool": 2,
        "overlap_mm3": 0.0
      }
    ],
    "support_scope": "Accessible rear peg undersides; curved short post/funnel bridges need layer review. No full-station cross bridges.",
    "qualification": "Geometric form and fit study; not yet sliced or physically print-qualified."
  },
  {
    "id": "tweezers",
    "label": "Four tweezers",
    "cells": 2,
    "width_mm": 48.8,
    "mount_columns_x_mm": [
      -12.7,
      12.7
    ],
    "pose": "right-cheek",
    "position": [
      127,
      0,
      0
    ],
    "print_bounds_mm": [
      180.445,
      57.177451130377875,
      48.800000000000026
    ],
    "peg_profile": {
      "variant": "rear-tongue-3p80-interference0p05",
      "board_grip_assumption_mm": 3.8,
      "source_board_assumption_mm": 3.94,
      "clearance_at_assumed_board_mm": -0.05,
      "predicted_clearance_at_3p94_board_mm": -0.1900000000000001,
      "tongue_run_mm": 5.0,
      "tongue_rise_mm": 3.3,
      "tongue_angle_deg": 33.4248111826038,
      "previous_tongue_angle_deg": 30.96375653207352,
      "elbow_center_y_mm": -2.578176717793985,
      "lower_locator": "Exact baseline lower locator, unchanged; designed for 3.94 mm board",
      "construction": "Canonical cylinder/sphere upper core and exact 120-degree cylindrical lower bearing segment. User-authorized parameter revision.",
      "scope": "Intentional interference: negative clearance requires plastic/board compliance. Assumed board grip, not measured thickness. No force or recoverable deformation claim.",
      "baseline_sha256": "f030d59fc8130b57cfcb4367202cdd0e03a1c335850f33fa41d28e85eb623d96"
    },
    "peg_checks": [
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      },
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      }
    ],
    "mesh": {
      "closed": true,
      "facets": 9300,
      "volume_error_fraction": 6.5723833080638e-06,
      "tessellation_cleanup": false
    },
    "tools": [
      {
        "kind": "tweezer",
        "files": [
          {
            "file": "tool-0-0.stl",
            "material": "steel"
          }
        ],
        "axis": [
          0.0,
          0.6427876096865393,
          0.766044443118978
        ],
        "old_tool": 4,
        "overlap_mm3": 0.0
      },
      {
        "kind": "tweezer",
        "files": [
          {
            "file": "tool-1-0.stl",
            "material": "steel"
          }
        ],
        "axis": [
          0.0,
          0.6427876096865393,
          0.766044443118978
        ],
        "old_tool": 8,
        "overlap_mm3": 0.0
      },
      {
        "kind": "tweezer",
        "files": [
          {
            "file": "tool-2-0.stl",
            "material": "steel"
          }
        ],
        "axis": [
          0.0,
          0.6427876096865393,
          0.766044443118978
        ],
        "old_tool": 9,
        "overlap_mm3": 0.0
      },
      {
        "kind": "tweezer",
        "files": [
          {
            "file": "tool-3-0.stl",
            "material": "steel"
          }
        ],
        "axis": [
          0.0,
          0.6427876096865393,
          0.766044443118978
        ],
        "old_tool": 10,
        "overlap_mm3": 0.0
      }
    ],
    "support_scope": "Accessible rear peg undersides; curved short post/funnel bridges need layer review. No full-station cross bridges.",
    "qualification": "Geometric form and fit study; not yet sliced or physically print-qualified."
  },
  {
    "id": "reel-thick",
    "label": "Large solder reel",
    "cells": 3,
    "width_mm": 74.19999999999999,
    "mount_columns_x_mm": [
      -25.4,
      25.4
    ],
    "pose": "right-cheek",
    "position": [
      -114.3,
      0,
      0
    ],
    "print_bounds_mm": [
      75.445,
      58.126633365059476,
      74.19999999999999
    ],
    "peg_profile": {
      "variant": "rear-tongue-3p80-interference0p05",
      "board_grip_assumption_mm": 3.8,
      "source_board_assumption_mm": 3.94,
      "clearance_at_assumed_board_mm": -0.05,
      "predicted_clearance_at_3p94_board_mm": -0.1900000000000001,
      "tongue_run_mm": 5.0,
      "tongue_rise_mm": 3.3,
      "tongue_angle_deg": 33.4248111826038,
      "previous_tongue_angle_deg": 30.96375653207352,
      "elbow_center_y_mm": -2.578176717793985,
      "lower_locator": "Exact baseline lower locator, unchanged; designed for 3.94 mm board",
      "construction": "Canonical cylinder/sphere upper core and exact 120-degree cylindrical lower bearing segment. User-authorized parameter revision.",
      "scope": "Intentional interference: negative clearance requires plastic/board compliance. Assumed board grip, not measured thickness. No force or recoverable deformation claim.",
      "baseline_sha256": "f030d59fc8130b57cfcb4367202cdd0e03a1c335850f33fa41d28e85eb623d96"
    },
    "peg_checks": [
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      },
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      }
    ],
    "mesh": {
      "closed": true,
      "facets": 8684,
      "volume_error_fraction": 2.365389238056241e-05,
      "tessellation_cleanup": false
    },
    "tools": [
      {
        "kind": "solder",
        "files": [
          {
            "file": "tool-0-0.stl",
            "material": "paper"
          },
          {
            "file": "tool-0-1.stl",
            "material": "steel"
          }
        ],
        "axis": [
          0.0,
          0.9396926207859083,
          0.3420201433256688
        ],
        "old_tool": 5,
        "overlap_mm3": 0.0
      }
    ],
    "support_scope": "Accessible rear peg undersides; curved short post/funnel bridges need layer review. No full-station cross bridges.",
    "qualification": "Geometric form and fit study; not yet sliced or physically print-qualified."
  },
  {
    "id": "reel-thin",
    "label": "Small solder reel",
    "cells": 3,
    "width_mm": 74.19999999999999,
    "mount_columns_x_mm": [
      -25.4,
      25.4
    ],
    "pose": "right-cheek",
    "position": [
      -114.3,
      0,
      -101.6
    ],
    "print_bounds_mm": [
      75.445,
      58.126633365059476,
      74.19999999999999
    ],
    "peg_profile": {
      "variant": "rear-tongue-3p80-interference0p05",
      "board_grip_assumption_mm": 3.8,
      "source_board_assumption_mm": 3.94,
      "clearance_at_assumed_board_mm": -0.05,
      "predicted_clearance_at_3p94_board_mm": -0.1900000000000001,
      "tongue_run_mm": 5.0,
      "tongue_rise_mm": 3.3,
      "tongue_angle_deg": 33.4248111826038,
      "previous_tongue_angle_deg": 30.96375653207352,
      "elbow_center_y_mm": -2.578176717793985,
      "lower_locator": "Exact baseline lower locator, unchanged; designed for 3.94 mm board",
      "construction": "Canonical cylinder/sphere upper core and exact 120-degree cylindrical lower bearing segment. User-authorized parameter revision.",
      "scope": "Intentional interference: negative clearance requires plastic/board compliance. Assumed board grip, not measured thickness. No force or recoverable deformation claim.",
      "baseline_sha256": "f030d59fc8130b57cfcb4367202cdd0e03a1c335850f33fa41d28e85eb623d96"
    },
    "peg_checks": [
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      },
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      }
    ],
    "mesh": {
      "closed": true,
      "facets": 8684,
      "volume_error_fraction": 2.365389238056241e-05,
      "tessellation_cleanup": false
    },
    "tools": [
      {
        "kind": "solder",
        "files": [
          {
            "file": "tool-0-0.stl",
            "material": "paper"
          },
          {
            "file": "tool-0-1.stl",
            "material": "steel"
          }
        ],
        "axis": [
          0.0,
          0.9396926207859083,
          0.3420201433256688
        ],
        "old_tool": 6,
        "overlap_mm3": 0.0
      }
    ],
    "support_scope": "Accessible rear peg undersides; curved short post/funnel bridges need layer review. No full-station cross bridges.",
    "qualification": "Geometric form and fit study; not yet sliced or physically print-qualified."
  },
  {
    "id": "braid",
    "label": "Braid roll",
    "cells": 2,
    "width_mm": 48.8,
    "mount_columns_x_mm": [
      -12.7,
      12.7
    ],
    "pose": "right-cheek",
    "position": [
      -50.8,
      0,
      -101.6
    ],
    "print_bounds_mm": [
      62.445,
      53.126633365059476,
      48.80000000000001
    ],
    "peg_profile": {
      "variant": "rear-tongue-3p80-interference0p05",
      "board_grip_assumption_mm": 3.8,
      "source_board_assumption_mm": 3.94,
      "clearance_at_assumed_board_mm": -0.05,
      "predicted_clearance_at_3p94_board_mm": -0.1900000000000001,
      "tongue_run_mm": 5.0,
      "tongue_rise_mm": 3.3,
      "tongue_angle_deg": 33.4248111826038,
      "previous_tongue_angle_deg": 30.96375653207352,
      "elbow_center_y_mm": -2.578176717793985,
      "lower_locator": "Exact baseline lower locator, unchanged; designed for 3.94 mm board",
      "construction": "Canonical cylinder/sphere upper core and exact 120-degree cylindrical lower bearing segment. User-authorized parameter revision.",
      "scope": "Intentional interference: negative clearance requires plastic/board compliance. Assumed board grip, not measured thickness. No force or recoverable deformation claim.",
      "baseline_sha256": "f030d59fc8130b57cfcb4367202cdd0e03a1c335850f33fa41d28e85eb623d96"
    },
    "peg_checks": [
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      },
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      }
    ],
    "mesh": {
      "closed": true,
      "facets": 8768,
      "volume_error_fraction": 2.1806350321359115e-05,
      "tessellation_cleanup": false
    },
    "tools": [
      {
        "kind": "braid",
        "files": [
          {
            "file": "tool-0-0.stl",
            "material": "blue"
          }
        ],
        "axis": [
          0.0,
          0.9396926207859083,
          0.3420201433256688
        ],
        "old_tool": 7,
        "overlap_mm3": 0.0
      }
    ],
    "support_scope": "Accessible rear peg undersides; curved short post/funnel bridges need layer review. No full-station cross bridges.",
    "qualification": "Geometric form and fit study; not yet sliced or physically print-qualified."
  },
  {
    "id": "drip-tray",
    "label": "Removable drip tray",
    "cells": 5,
    "width_mm": 125.0,
    "mount_columns_x_mm": [
      -50.8,
      50.8
    ],
    "pose": "upright",
    "position": [
      38.1,
      0,
      -127
    ],
    "print_bounds_mm": [
      125.0,
      84.97663336505948,
      53.445
    ],
    "peg_profile": {
      "variant": "rear-tongue-3p80-interference0p05",
      "board_grip_assumption_mm": 3.8,
      "source_board_assumption_mm": 3.94,
      "clearance_at_assumed_board_mm": -0.05,
      "predicted_clearance_at_3p94_board_mm": -0.1900000000000001,
      "tongue_run_mm": 5.0,
      "tongue_rise_mm": 3.3,
      "tongue_angle_deg": 33.4248111826038,
      "previous_tongue_angle_deg": 30.96375653207352,
      "elbow_center_y_mm": -2.578176717793985,
      "lower_locator": "Exact baseline lower locator, unchanged; designed for 3.94 mm board",
      "construction": "Canonical cylinder/sphere upper core and exact 120-degree cylindrical lower bearing segment. User-authorized parameter revision.",
      "scope": "Intentional interference: negative clearance requires plastic/board compliance. Assumed board grip, not measured thickness. No force or recoverable deformation claim.",
      "baseline_sha256": "f030d59fc8130b57cfcb4367202cdd0e03a1c335850f33fa41d28e85eb623d96"
    },
    "peg_checks": [
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      },
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true,
        "profile": "rear-tongue-3p80-interference0p05"
      }
    ],
    "mesh": {
      "closed": true,
      "facets": 8182,
      "volume_error_fraction": 1.9578751515178173e-05,
      "tessellation_cleanup": false
    },
    "tools": [],
    "support_scope": "Accessible rear peg undersides; curved short post/funnel bridges need layer review. No full-station cross bridges.",
    "qualification": "Geometric form and fit study; not yet sliced or physically print-qualified."
  },
  {
    "scale": 1.0,
    "count": 2,
    "seat_centers_x_mm": [
      -12.7,
      12.7
    ],
    "seat_pitch_mm": 25.4,
    "module_cells": 2,
    "edge_clearance_mm": 1,
    "nominal_module_width_mm": 50.8,
    "peg_columns_x_mm": [
      -12.7,
      12.7
    ],
    "peg_reports": [
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true
      },
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true
      }
    ],
    "peg_fit": {
      "variant": "rear-tongue-3p80-interference0p05",
      "board_grip_assumption_mm": 3.8,
      "source_board_assumption_mm": 3.94,
      "clearance_at_assumed_board_mm": -0.05,
      "predicted_clearance_at_3p94_board_mm": -0.1900000000000001,
      "tongue_run_mm": 5.0,
      "tongue_rise_mm": 3.3,
      "tongue_angle_deg": 33.4248111826038,
      "previous_tongue_angle_deg": 30.96375653207352,
      "elbow_center_y_mm": -2.578176717793985,
      "lower_locator": "Exact baseline lower locator, unchanged; designed for 3.94 mm board",
      "construction": "Canonical cylinder/sphere upper core and exact 120-degree cylindrical lower bearing segment. User-authorized parameter revision.",
      "scope": "Intentional interference: negative clearance requires plastic/board compliance. Assumed board grip, not measured thickness. No force or recoverable deformation claim.",
      "baseline_sha256": "f030d59fc8130b57cfcb4367202cdd0e03a1c335850f33fa41d28e85eb623d96"
    },
    "envelope_trim_mm3": 0.0,
    "throat_mm": [
      8.0,
      18.0
    ],
    "mouth_mm": [
      16.0,
      36.0
    ],
    "corner_radius_max_mm": 2,
    "host_extended_check": "passed",
    "export": {
      "valid": true,
      "solids": 1,
      "closed_mesh": true,
      "step_exchange_healed": false,
      "step_relative_volume_error": 2.7163553815866556e-08,
      "mesh_relative_volume_error": 0.00030710230081650985
    },
    "print_export": {
      "valid": true,
      "solids": 1,
      "closed_mesh": true,
      "step_exchange_healed": false,
      "step_relative_volume_error": 2.7163631260073697e-08,
      "mesh_relative_volume_error": 0.0003134379262836787
    },
    "print_pose_bounds_mm": [
      71.44500000000002,
      64.74137431031903,
      48.800000000000004
    ],
    "dimensions_mm": [
      48.8,
      64.741374310319,
      71.445
    ],
    "measured_throats_mm": [
      [
        8.0,
        18.0
      ],
      [
        8.0,
        18.0
      ]
    ],
    "tools": [
      {
        "kind": "micro-snips",
        "scale": 1.0,
        "files": [
          {
            "file": "tool-0-0.stl",
            "material": "steel"
          },
          {
            "file": "tool-0-1.stl",
            "material": "steel"
          },
          {
            "file": "tool-0-2.stl",
            "material": "steel"
          },
          {
            "file": "tool-0-3.stl",
            "material": "darksteel"
          },
          {
            "file": "tool-0-4.stl",
            "material": "red"
          },
          {
            "file": "tool-0-5.stl",
            "material": "red"
          }
        ],
        "max_sampled_path_overlap_mm3": 0
      },
      {
        "kind": "needle-nose",
        "scale": 1.0,
        "files": [
          {
            "file": "tool-1-0.stl",
            "material": "steel"
          },
          {
            "file": "tool-1-1.stl",
            "material": "steel"
          },
          {
            "file": "tool-1-2.stl",
            "material": "steel"
          },
          {
            "file": "tool-1-3.stl",
            "material": "darksteel"
          },
          {
            "file": "tool-1-4.stl",
            "material": "blue"
          },
          {
            "file": "tool-1-5.stl",
            "material": "blue"
          }
        ],
        "max_sampled_path_overlap_mm3": 0
      }
    ],
    "handle_gap_planning_mm": 17.2,
    "scope": "Assumed flat-tool envelopes, not measured tools. Intentional rear-peg interference requires board/peg compliance. Physical fit, force, creep, print finish and load unverified.",
    "sha256": "133a0c4262a731840d54540e8efd479a69f7c511f72cd494b09557551293e7b4",
    "id": "snips-pliers",
    "label": "Snips + small pliers",
    "cells": 2,
    "width_mm": 48.8,
    "position": [
      -50.8,
      0,
      0
    ],
    "pose": "right-cheek",
    "peg_profile": {
      "variant": "rear-tongue-3p80-interference0p05",
      "board_grip_assumption_mm": 3.8,
      "source_board_assumption_mm": 3.94,
      "clearance_at_assumed_board_mm": -0.05,
      "predicted_clearance_at_3p94_board_mm": -0.1900000000000001,
      "tongue_run_mm": 5.0,
      "tongue_rise_mm": 3.3,
      "tongue_angle_deg": 33.4248111826038,
      "previous_tongue_angle_deg": 30.96375653207352,
      "elbow_center_y_mm": -2.578176717793985,
      "lower_locator": "Exact baseline lower locator, unchanged; designed for 3.94 mm board",
      "construction": "Canonical cylinder/sphere upper core and exact 120-degree cylindrical lower bearing segment. User-authorized parameter revision.",
      "scope": "Intentional interference: negative clearance requires plastic/board compliance. Assumed board grip, not measured thickness. No force or recoverable deformation claim.",
      "baseline_sha256": "f030d59fc8130b57cfcb4367202cdd0e03a1c335850f33fa41d28e85eb623d96"
    }
  }
]