{
  "id": "solder-modules-tweezers",
  "version": 7,
  "files": {
    "installed": "part-solder-modules-tweezers__v7__4-tweezer-stack-14-mount-points__fit-e586ab4ff6__installed",
    "print-right-cheek": "part-solder-modules-tweezers__v7__4-tweezer-stack-14-mount-points__fit-e586ab4ff6__print-right-cheek"
  },
  "fit": {
    "canonical_source": "reference/peg-fit.scad",
    "config_sha256": "e586ab4ff6173c76e10c960ca707da94b01c615a629480d4bceeae71c80e2438",
    "hooks": [
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true
      },
      {
        "board_side_difference_mm3": 0.0,
        "buried_overlap_mm": 1.25,
        "single_valid_solid": true
      }
    ],
    "columns_x_mm": [
      -12.7,
      12.7
    ],
    "straight_rows": [
      1,
      2,
      3,
      4,
      5,
      6
    ],
    "straight_count": 12,
    "locator_diameter_mm": 6.449999999999999,
    "diametral_interference_mm": 0.1,
    "locator_depth_from_board_face_mm": 3.8,
    "configuration": {
      "PEG_FIT_REVISION": "rear-tongue-3p80-interference0p05",
      "PEG_BOARD_GRIP": 3.8,
      "PEG_PULL_CLEARANCE": -0.05,
      "PEG_TONGUE_RUN": 5.0,
      "PEG_TONGUE_RISE": 3.3,
      "PEG_HOLE_DIAMETER": 6.35,
      "PEG_DIAMETER": 5.6,
      "PEG_TONGUE_DIAMETER": 4.8,
      "PEG_FACE_Y": 0.15,
      "PEG_ROOT_Y": 1.4,
      "PEG_SEAT_DROP": 0.12,
      "PEG_PITCH": 25.4,
      "PEG_ARRAY_DIAMETRAL_INTERFERENCE": 0.1,
      "PEG_ARRAY_DEPTH": 3.8,
      "PEG_ARRAY_TIP_DIAMETER": 5.2,
      "PEG_ARRAY_LEAD_LENGTH": 1.0
    },
    "scope": "Optional array; upper hook geometry unchanged. Deliberate bore contact needs board/plastic compliance; retention force and wear unmeasured."
  },
  "tools": [
    {
      "kind": "tweezer",
      "files": [
        {
          "file": "part-solder-modules-tweezers__v7__4-tweezer-stack-14-mount-points__fit-e586ab4ff6__tool-1-0-envelope.stl",
          "material": "steel"
        }
      ],
      "axis": [
        0.0,
        0.6427876096865393,
        0.766044443118978
      ],
      "old_tool": 4,
      "overlap_mm3": 0.0
    },
    {
      "kind": "tweezer",
      "files": [
        {
          "file": "part-solder-modules-tweezers__v7__4-tweezer-stack-14-mount-points__fit-e586ab4ff6__tool-2-0-envelope.stl",
          "material": "steel"
        }
      ],
      "axis": [
        0.0,
        0.6427876096865393,
        0.766044443118978
      ],
      "old_tool": 8,
      "overlap_mm3": 0.0
    },
    {
      "kind": "tweezer",
      "files": [
        {
          "file": "part-solder-modules-tweezers__v7__4-tweezer-stack-14-mount-points__fit-e586ab4ff6__tool-3-0-envelope.stl",
          "material": "steel"
        }
      ],
      "axis": [
        0.0,
        0.6427876096865393,
        0.766044443118978
      ],
      "old_tool": 9,
      "overlap_mm3": 0.0
    },
    {
      "kind": "tweezer",
      "files": [
        {
          "file": "part-solder-modules-tweezers__v7__4-tweezer-stack-14-mount-points__fit-e586ab4ff6__tool-4-0-envelope.stl",
          "material": "steel"
        }
      ],
      "axis": [
        0.0,
        0.6427876096865393,
        0.766044443118978
      ],
      "old_tool": 10,
      "overlap_mm3": 0.0
    }
  ],
  "working_geometry_difference_mm3": 0.0,
  "print_face": "right-cheek",
  "print_bounds_mm": [
    180.4529869610378,
    57.18543809141562,
    48.80000020000012
  ],
  "qualification": "Physical retention correction trial; not sliced, force-tested or physically fit-qualified."
}