Hex keys, a tape measure and coiled leads. Each body has a broad bed face, layer-aligned lower hoops, and a short lift-and-pull pickup path.
Prototype status: native CAD, mesh, clearance and linear stiffness checks pass. Local P1S / PolyLite ASA toolpaths have been reviewed. Physical print, fit and handling tests are pending.
Download all three: native CAD, STL, source and checks (ZIP)
Nine upright L-keys, 1.5–10 mm. Short arms rest on the floor. Lift 9 mm and pull forward through the open guides.
Flat bottom on the bed
175.8 × 76.8 × 62.4 mm
Local slice: 3h 38m 48s · about 80 g
Peg supports: 2.06 g
5 N stiffness calculation: 0.002 mm sideways, 0.147 mm down.
Print-oriented STL · Checks and assumptions · Support layout
A shallow open dock for a tape measure up to 92 mm across and 48 mm deep including its clip. Lift 10 mm and pull forward.
Flat bottom on the bed
99.6 × 70.8 × 62.4 mm
Local slice: 1h 53m 16s · about 36 g
Peg supports: 2.06 g
5 N stiffness calculation: 0.003 mm sideways, 0.060 mm down.
Print-oriented STL · Checks and assumptions · Support layout
A broad saddle and raised nose hold coiled test leads or USB cables. Lift the coil over the nose and pull forward.
Right cheek on the bed
62.1 × 64.8 × 48.8 mm
Local slice: 1h 38m 31s · about 27 g
Peg supports: 0.93 g
5 N stiffness calculation: 0.007 mm sideways, 0.006 mm down.
Print-oriented STL · Checks and assumptions · Support layout
